Seamless gutters in Tulsa · RainTech Roofing Seamless gutters,formed on site.

RainTech Roofing forms seamless gutters from Norandex aluminum coil right off our fleet trucks, cut to the exact length of every run on your home. Custom copper gutters too.

100% financing available · same-day options with your quote

Price your gutters.

Ballpark it before we measure. Ranges are 2026 Tulsa-area installed prices per linear foot. Tap an option to compare.

Gutter
Old gutters
Height

Ballpark price

:

Typical life
:
Best for
:
Get an exact quote

For illustration only. These ranges are general 2026 Tulsa-area figures, not a quote or estimate, and are not binding on RainTech Roofing. Corners, downspout count, fascia repair and color all change the real number.

Are your gutters failing?

Walk the house during or right after a good rain. Check what you see. Not every problem means new gutters.

Signs you're seeing
0 of 7 signsFineRepairReplace

Looking good

Nothing on the list. Keep them clean, especially after spring and fall, and check again after big storms.

Book a free gutter check

Aluminum or copper.

Every run is measured and formed for your home. The difference is the metal, the size and how long you want it to last.

Black seamless aluminum gutter and downspout on a modern home

Seamless aluminum

Typical life
20 to 30 years
Installed, Tulsa 2026
$9 to $17 / ft

Hail. Aluminum won't rust, but it can dent in big hail. Storm-damaged gutters are often covered in the same claim as the roof.

Best for. Most Tulsa homes. Formed on site from Norandex coil in multiple colors, in 5-inch or oversized 6-inch for big roofs, with fewer joints and fewer leak points.

Made on your driveway.

  1. 01

    Measure every run

    We inspect the fascia, roof edge and drainage path, then measure each run of the house.

  2. 02

    Form it on the truck

    Norandex aluminum coil runs through the roll-former on our truck and comes out as one continuous gutter, cut to the exact length.

  3. 03

    Hang it right

    Secure hanger spacing and the right pitch toward each outlet, so water drains instead of standing.

  4. 04

    Route the water

    Downspouts sized and placed to carry water away from the foundation, landscaping and walkways.

Seamless means no joints except at corners and downspouts, which is where leaks start.

Get a free gutter quote

Recent gutters.

Custom copper gutters and downspouts
Custom copper gutters and downspouts
A seamless run, formed beside the truck
A seamless run, formed beside the truck
Black seamless gutters, modern build
Black seamless gutters, modern build
Hanging a new run
Hanging a new run
Downspout on brick and clay tile
Downspout on brick and clay tile
Seamless gutters and downspout
Seamless gutters and downspout
Finished gutter line
Finished gutter line
Color-matched to the trim
Color-matched to the trim

Rain Gutters questions.

Straight answers before you book.

All FAQs →
How much do seamless gutters cost in Tulsa?
Seamless 5-inch aluminum typically runs $9 to $14 per linear foot installed in the Tulsa area, 6-inch $12 to $17, and copper $30 to $50+. A typical home with about 200 feet of gutter usually lands between $1,800 and $3,400 in aluminum. Two-story homes, lots of corners and fascia repair add to it.
What does seamless actually mean?
We form the gutter on site from a continuous coil of Norandex aluminum on our truck and cut each piece to the exact length of the run. The only joints are at corners and downspouts, so there are far fewer places to leak than with pre-cut sectional gutters.
Do you offer copper gutters?
Yes. Custom copper gutters are available for high-end homes, historic properties and architectural builds. Copper lasts 50 to 100+ years and develops a natural patina.
What colors are available?
Norandex aluminum comes in multiple colors, so we can match or contrast your trim. Bring a color in mind and we'll show you the options.
5-inch or 6-inch gutters?
Five-inch handles most Tulsa homes. Six-inch carries far more water and is the right call for big roof planes, steep pitches and spots that overflow in heavy rain.
Can my gutters be repaired instead of replaced?
Often, yes. Loose or sagging gutters, leaking corners, detached downspouts and bad slope are usually repairable. We inspect the whole drainage path and recommend repair when it makes sense.
Do I need a permit for new gutters in Tulsa?
Tulsa-area cities generally don't require a permit for gutter-only work. We still make sure downspouts carry water away from your foundation and not onto your neighbor's property.
Can you add gutter guards?
Yes. We install Leaf Terminator gutter protection, either with new gutters or on the gutters you have. See our gutter protection page.

Book a free inspection with RainTech Roofing.

Three quick steps, under a minute. We'll call to schedule a time that works for you. Prefer to talk now? Call the office.

  • Free inspection, no obligation
  • Photos of everything we find
  • Help with insurance claims
  • Callback within one business day
(918) 449-1474
3815 S 79th E Ave, Tulsa, OK 74145 Oklahoma CIB License No. 80001347
Step 1 of 3
What can RainTech Roofing help with?
Where's the property?
Who should we call?